Repair and firmware updates for AUDI BCM2 blocks, cloning, reading, and transferring IMMO data.

Repair and firmware updates for VAG ECU blocks (engine control units), cloning, transferring immobiliser data, synchronisation, and recovery after unsuccessful firmware updates.

Repair and firmware of VAG TCU blocks (DSG control unit, multitronic)

Repair and firmware of VAG CCM blocks (VAG comfort unit)
Repair and firmware of the AUDI ELV blocks (steering lock control unit)

Repair and firmware of VW EZS blocks (steering lock control unit)

Cloning of ECU, TCU, ELV, EZS, BCM2 control boards after replacement, transfer of all VIN, immo data (eeprom, flash)

ALL ECU VAG MEDC17 (ME17/MED17/EDC17) clone, adaptation, BCM2 clone, adaptation

MEDC17(ME17/MED17/EDC17) – Editor, import from (CCM / ECU/ SECURITY BLOCK)
SIEMENS PCR2.1 – Editor, import from (CCM / ECU/ SECURITY BLOCK)
SIEMENS PPD1.X – Editor, import from (CCM / ECU/ SECURITY BLOCK)

MED9 No Crypted – Editor, import from (CCM / ECU/ SECURITY BLOCK)
EDC16 – Editor, import from (CCM / ECU/ SECURITY BLOCK)
MM 9GV – Editor, import from (ECU/ SECURITY BLOCK)

MM 7GV – Editor, import from (ECU/ SECURITY BLOCK)
CCM PASSAT – Editor, export to (ECU/EMULATOR)
BCM2 AUDI A4/A5/Q5 – Editor, export to (direction to ECU/ELV/TCU/EMULATOR)
ELV AUDI WFS5 – Editor, import from (direction from BCM2)
ELV/EZS AUDI A6/Q7 – Editor, export to (direction to ECU)

EZS VW CRAFTER – Editor, export to (direction to ECU)

TCU MANAGER – automatic gearboxes VAG DQ200 MQB, DQ250 MQB, VL300, VL381, DL382, DL501, DQ200 MQB Gen2, DQ500, DQ381, AL551
For proper work, just need non-encrypted full readout from TCU flash + eeprom, allowed is copy immo data between TCU (EXCEPT DL382) and change power class, viewer, editor

SIMOS18 /SIMOS12 /SIMOS10
For proper work, just need non-encrypted full readout from ECU flash + eeprom, and also the ECU cannot use SHE (Secure Extension Hardware), allowed is copy immo data between ECU and change power class, import immo-data from BCM2 and other immo block.

MED9.1.X CRYPTO
MEDC17 BOSCH POWER CLASS / MARKEN CLASS
SIMOS8.XX (SIMOS8.1, SIMOS8.2, SIMOS8.3, SIMOS8.4, SIMOS8.5, SIMOS8.6) –
MQB IMMO data manager
Generate TCU/ECU/ELV synchronisation data from SYNC_KEY 32 bytes and IMMO_BLOCK 189 bytes files read by VVDI. You must have one working key to get these files.
BCM2 A6/A7/A8/Touareg IMMO data manager
Generate TCU/ECU/ELV synchronisation data from BCM2 MCU NEC files and SYNC_KEY 32 bytes or KEY 512 bytes file read by VVDI.
ELV MQB IMMO data manager supports ELV with the NEC v850 MCU Module, allowing edit, export /import immobiliser data in steering lock (ELV/ESL) MQB.